Hotline+86 192-3286-6955 [email protected] Mon–Sat 9:00–19:00 (GMT+8)
SOLUTION BRIEF

Dehumidifier & Air Treatment · Solution Brief

Compressor & TEC dual platforms: precise humidity control, laundry/sleep scenes, app connected.

Printable as PDF (Ctrl+P) · contact us for the official release

DEFINITIONA dehumidifier solution controls compressor-based or semiconductor (TEC) dehumidification cores with precise humidity sensing, smart defrosting, tank-full protection and multi-mode operation (continuous/laundry/sleep). MJX offers production platforms for both routes, covering 12–50L/D home units and compact wardrobe dehumidifiers.

Key Features

Dual PlatformsCompressor (12–50L/D) and TEC (0.5–1.5L/D compact) fully covered
Precise ControlIndustrial-grade sensing with factory calibration, ±3%RH accuracy
Smart DefrostTime + evaporator-temperature dual-condition defrost; <5°C protection extends compressor life
Multi-scene ModesContinuous / smart / laundry / sleep with < 38dB tuning
Tank-full SafetyFloat switch + firmware double protection, auto shutoff, continuous drain supported
ConnectedWiFi app remote control, humidity history, voice assistants

Solution Specifications

Typical Specifications (customizable)
MCU8/32-bit platform, touch or key panel options
RoutesCompressor 12/20/30/50L/D; TEC 0.5–1.5L/D
Humidity30–80%RH target, ±3%RH, adjustable hysteresis
DefrostDual-condition smart defrost (compressor models)
ProtectionsTank full, tip-over, 3-min compressor delay, overheat
FanDC variable speed, sleep < 38dB
HMILED/LCD/touch with humidity & mode display
IoTWiFi (Tuya) + app + voice (optional)
EnergyStandby < 0.5W, EU efficiency & UL ready
ComplianceCCC / CE / UL / ETL / RoHS / energy label

Deliverables

  • Complete main + power + panel solution (schematic/PCB/firmware)
  • Humidity calibration SOP and factory fixture plan
  • Defrost/protection parameter tables per model
  • BOM with alternates (compressors, sensors multi-sourced)
  • Samples + test reports (capacity, noise, energy, thermal)

Key Facts

MCU Platform8/32-bit MCU
Dev Cycle7-day eval / 25–35 day prototype
MOQNo MOQ for protos · 500+ pilot
EngagementODM custom / ready-made supply

FAQ

Compressor or semiconductor — which route?
For 20L/D+ home units, compressor (efficient, cost-effective); for wardrobe/bedroom/car (<2L/D), TEC (silent, compact, low cost). We provide production platforms for both.
How do you prevent inflated capacity claims?
Units are rated at standard conditions (27°C/60%RH and 30°C/80%RH) with a factory capacity test fixture and reports delivered — third-party verifiable.
Can it pass UL/ETL?
Power and protection circuits follow UL design rules (compressor protection, flame-retardant specs). We have UL co-certification experience and accompany submissions.
How is sensor drift handled?
Two/three-point factory calibration plus firmware temperature compensation yields ±3%RH整机 accuracy; calibration fixtures included.

Get the full documentation

Official spec sheets, BOMs and test reports are available under NDA.

Get a Quote

Ready to Start?

Send your product requirement — our engineering team responds within 1 business day with a free assessment and quotation.

WeChat
kb19232866955
Phone
+86 192-3286-6955
Email
[email protected]
Working Hours
Mon–Sat 9:00–19:00 (GMT+8)

Your information stays strictly confidential. Typical reply within 1 business day.

Thank you! We’ve received your inquiry and will respond within 1 business day.