SOLUTION BRIEF
Floor Washer & Cleaning Appliances · Solution Brief
Three-motor coordination + dirt sensing + self-cleaning dock — a complete floor washer platform.
Printable as PDF (Ctrl+P) · contact us for the official release
DEFINITIONA floor washer (wet & dry vacuum) solution coordinates brush motor, suction fan and water pump with infrared dirt sensing, clean/dirty water management and self-cleaning dock control — covering corded/cordless, dock/no-dock models, extensible to hot-water washing and electrolysis sterilization.
Key Features
3-Motor CoordinationBrush + fan + metering pump with dirt-adaptive water & suction
Dirt SensingIR turbidity detection auto-boosts water and suction on dirty patches
Water ManagementClean/dirty tank level sensing, dry-run protection, leak detection
Self-cleaning DockBrush wash + spin dry + heated air drying (optional), one-touch flow
SterilizationSilver-ion/electrolysis module options with 99.9% report support
UX & AppLED/LCD display, voice prompts, app modes & consumable tracking
Solution Specifications
| Controller | 32-bit MCU + motor drivers, RTOS scheduling |
|---|---|
| Motors | Brush BLDC/brushed + suction BLDC (≤150W) + metering pump |
| Sensors | IR dirt, tank levels, brush-ground contact, posture |
| Modes | Auto/boost/water-suction/sterilize/edge, dirt-adaptive |
| Battery | 25–40V pack with BMS, 30–50min runtime |
| Dock | Brush wash, pipe flush, 55–70°C heated dry, auto water (optional) |
| Sterilization | Electrolysis/silver-ion module interface |
| UX | LED/LCD + multi-language voice + app (optional) |
| Safety | Leak detection, tip-over shutoff, over-current/thermal, charge safety |
| Compliance | CCC / CE / UL / ETL / RoHS |
Deliverables
- Complete solution (main + drive + dock boards, HW & firmware)
- Motor-coordination and dirt-adaptive algorithms
- Water-system protection logic with FMEA docs
- App/voice/display OEM customization
- Prototype co-debug + MP test plan (water-tightness, aging, safety)
Key Facts
| MCU Platform | 32-bit MCU + RTOS |
|---|---|
| Dev Cycle | 10-day eval / 35–45 day prototype |
| MOQ | Project-based · 1000+ pilot |
| Engagement | Joint ODM / second source |
FAQ
How good is water-residue control?
Calibrated suction with brush-speed and ground-contact tuning yields < 5g/m² residue (brush-dependent) — first-tier industry level.
Do you support hot-water models?
Yes — instant heating (40–75°C) with dry-burn protection and child-lock logic is an optional pack.
Can it share a platform with robot vacuums?
The power-control and RTOS foundation is shared; upper logic is per product line — multi-category clients cut cost significantly.
Is auto water feed/drain on the dock possible?
Available as a dock option; requires plumbing form-factor alignment — joint evaluation recommended.
Ready to Start?
Send your product requirement — our engineering team responds within 1 business day with a free assessment and quotation.
WeChat
kb19232866955
Phonekb19232866955
+86 192-3286-6955 Email
[email protected]
Working Hours
Mon–Sat 9:00–19:00 (GMT+8)
Mon–Sat 9:00–19:00 (GMT+8)
Thank you! We’ve received your inquiry and will respond within 1 business day.