Hotline+86 192-3286-6955 [email protected] Mon–Sat 9:00–19:00 (GMT+8)
SOLUTION BRIEF

Pool Cleaner Robot Solution · Solution Brief

Production-proven platform: BLDC drives, path planning and app control for wired & cordless pool robots.

Printable as PDF (Ctrl+P) · contact us for the official release

DEFINITIONA robotic pool cleaner solution integrates BLDC motor drives, gyro-based inertial navigation, pump control and water-ingress monitoring into a complete underwater robot controller, supporting both tethered and cordless app-controlled models for residential and commercial pools.

Key Features

BLDC FOC DrivesDual track/wheel BLDC + pump motor with FOC, +25% efficiency
Inertial Navigation6-axis IMU + odometry S-pattern coverage with wall/edge climbing strategy
Leak-safe DesignMulti-point ingress detection with thermal guard; auto surface return on fault
Wired & CordlessAC tethered 100–240V or cordless Li-ion with WiFi app — one control core
App ExperienceLive cleaning map, mode switching, filter life alerts, OTA
Filtration LogicClog detection, auto-debris release, water-quality sensor interface reserved

Solution Specifications

Typical Specifications (customizable)
Controller32-bit MCU (STM32/GD32 class) + drive co-processor, RTOS
Drive2× track BLDC FOC + 1× pump BLDC, up to 2×120W
Navigation6-axis IMU + odometry, S-pattern coverage, wall climbing
PowerTethered: AC 100–240V→30V bus; Cordless: 25.2V Li-ion pack
RuntimeCordless 90–150min per configuration
CommsTether control / WiFi 2.4G app / BLE provisioning
WaterproofingIPX8, rated depth ≤ 3m (residential)
SafetyMulti-point leak sensing, over-temp, stall & low-battery auto-surface
AppCleaning map, modes, filter alerts, multi-language, OTA
ComplianceCE / FCC / UL (motor) / RoHS / EMC

Deliverables

  • Complete controller set (main + drive + power boards, HW & firmware)
  • Path-planning algorithm library with calibration tools
  • Leak-safety firmware incl. FMEA documentation
  • OEM app or ecosystem integration
  • Prototype co-debugging + MP test plan (sealing/aging/pre-EMC)

Key Facts

MCU PlatformSTM32/GD32 + RTOS + FOC
Dev Cycle10-day eval / first build 45–60 days
MOQProject-based · 1000+ for MP
EngagementJoint ODM / second source

FAQ

How long does pool robot development take?
On our platform: 10-day evaluation, first prototype in 45–60 days, and typically 6–9 months to MP including tooling and certifications. Existing mechanical platforms accelerate this significantly.
Do you support second-source engagements for big brands?
Yes. We provide auditable documentation, code escrow, NDA-first confidentiality, and welcome QA audits and on-site joint debugging.
How is underwater leak detection implemented?
Multi-point conductive probes plus humidity sensing trigger millisecond-level protection: stop, report, auto-surface return. A production sealing test plan is delivered together.
What runtime do cordless models reach?
Typically 90–150 minutes depending on pack size and pump power; we provide a power-budget worksheet to define the whole machine.

Get the full documentation

Official spec sheets, BOMs and test reports are available under NDA.

Get a Quote

Ready to Start?

Send your product requirement — our engineering team responds within 1 business day with a free assessment and quotation.

WeChat
kb19232866955
Phone
+86 192-3286-6955
Email
[email protected]
Working Hours
Mon–Sat 9:00–19:00 (GMT+8)

Your information stays strictly confidential. Typical reply within 1 business day.

Thank you! We’ve received your inquiry and will respond within 1 business day.