Hotline+86 192-3286-6955 [email protected] Mon–Sat 9:00–19:00 (GMT+8)
SOLUTION BRIEF

Space Heater Solution · Solution Brief

PTC heating + tip-over cutoff + dual overheat protection — a safety-first heater platform.

Printable as PDF (Ctrl+P) · contact us for the official release

DEFINITIONA space heater solution integrates PTC ceramic heating drive, PID thermostat control, tip-over and overheat protection with fan interlock for desktop, bathroom and pet heaters. Safety compliance (clearances, flammability, tip-over) is the core barrier.

Key Features

PTC ThermostatNTC + PID power modulation, ±2°C stability
Tip-over CutoffMechanical switch + accelerometer dual safety
Dual Overheat GuardThermostat + thermal fuse + firmware limit
Fan InterlockHeater and fan logic interlocked: fan stops last
Quiet & Low OdorSoft start and gradual power ramp reduce heat shock odor

Solution Specifications

Typical Space Heater Specs
MCU8-bit MCU + triac/relay
HeatingPTC 300–2000W
ThermostatNTC + PID, ±2°C
ProtectionTip-over, thermostat, fuse, firmware limit
FanDC/AC interlocked with heater
Timer1–12 hours
Safety stdGB 4706 / IEC 60335 / UL 1278 design
ComplianceCCC / CE / UL / ETL / RoHS

Deliverables

  • Controller (schematic/PCB/firmware)
  • Safety design review checklist
  • Samples + temperature-rise/tip-over test reports
  • BOM and certification submission support

Key Facts

MCU Platform8-bit MCU + triac
Dev Cycle5-day eval / 25-day prototype
MOQNo MOQ for protos · 1000+ pilot
EngagementODM custom / ready-made

FAQ

Can it pass UL/ETL?
Designs follow UL 1278 (dual overheat, tip-over, flame-retardant materials, clearances) with successful submissions and remediation support.
Is the thermostat really accurate?
NTC sampling with PID and ambient compensation holds ±2°C — an order of magnitude better than bimetal thermostats.
Any special requirements for pet heaters?
Chew-resistant cables, low surface temperature (< 45°C) and no exposed elements are key; a low-temperature PTC with isolation is available.

Get the full documentation

Official spec sheets, BOMs and test reports are available under NDA.

Get a Quote

Ready to Start?

Send your product requirement — our engineering team responds within 1 business day with a free assessment and quotation.

WeChat
kb19232866955
Phone
+86 192-3286-6955
Email
[email protected]
Working Hours
Mon–Sat 9:00–19:00 (GMT+8)

Your information stays strictly confidential. Typical reply within 1 business day.

Thank you! We’ve received your inquiry and will respond within 1 business day.