Hotline+86 192-3286-6955 [email protected] Mon–Sat 9:00–19:00 (GMT+8)
SOLUTION BRIEF

Window Cleaning Robot Solution · Solution Brief

Vacuum adhesion + edge detection + anti-drop — the core control platform for window cleaners.

Printable as PDF (Ctrl+P) · contact us for the official release

DEFINITIONA window cleaning robot solution integrates vacuum adhesion control, frame/edge detection, S-pattern path planning and power-loss anti-drop safety for glass-cleaning robots in square and round forms. Adhesion reliability and safety redundancy are the core.

Key Features

Closed-loop AdhesionReal-time vacuum feedback with compensation on smooth or slightly rough glass
Anti-drop SafetyBackup battery + safety rope; 20-minute hold on power loss
Edge DetectionOptical + current dual detection slows at the frame
Path PlanningS-pattern coverage with resume and return-to-start
Spray ControlMetering pump with wet-wipe and squeegee rollers

Solution Specifications

Typical Window Cleaner Specs
MCU32-bit MCU + BLDC drive
AdhesionVacuum pump, 2500–4000Pa
MotionDual track/wheel BLDC, 5–15cm/s
Safety20min backup hold + rope + pressure alarm
SensingOptical edge + stall current + pressure
PowerAC adapter + backup battery
Noise< 65dB
ComplianceCE / FCC / RoHS / UL (adapter)

Deliverables

  • Complete controller set (main + drive + pump)
  • Adhesion safety logic with FMEA
  • Path-planning algorithms
  • Prototype co-debug + high-altitude safety test plan

Key Facts

MCU Platform32-bit MCU + BLDC drive
Dev Cycle10-day eval / 45-day first build
MOQProject-based · 500+ pilot
EngagementJoint ODM / second source

FAQ

Will it really not fall on power loss?
A backup battery takes over the vacuum pump instantly — 20+ minutes of hold with a pressure alarm, plus a mechanical safety rope. Three layers.
Does it work on frosted or filmed glass?
Frosted glass loses about 30% adhesion — a compensation mode handles it. Filmed glass works normally; avoid sharp grit.
How long is development?
On the mature platform: 10-day assessment, 45-day first build, 5–7 months to mass production including tooling and certification.

Get the full documentation

Official spec sheets, BOMs and test reports are available under NDA.

Get a Quote

Ready to Start?

Send your product requirement — our engineering team responds within 1 business day with a free assessment and quotation.

WeChat
kb19232866955
Phone
+86 192-3286-6955
Email
[email protected]
Working Hours
Mon–Sat 9:00–19:00 (GMT+8)

Your information stays strictly confidential. Typical reply within 1 business day.

Thank you! We’ve received your inquiry and will respond within 1 business day.