Hotline+86 192-3286-6955 [email protected] Mon–Sat 9:00–19:00 (GMT+8)
Automotive Electronics

Car Charger Solution — Multi-port PD/QC Fast Charging PCBA

SOLUTION DEFINITIONA car fast charger solution integrates DC-DC step-down, USB PD/QC protocol recognition and multi-port power allocation for in-vehicle power, covering cigarette-lighter plugs and flush-mount panels. Conversion efficiency, thermal control and protocol compatibility are the keys.
Car Fast Charger Solution - MJX

Pain Points We Solve

  • Inflated wattage cannot charge a laptop
  • Multi-port use collapses to slow charging
  • Summer cabin heat triggers shutdowns
  • Protocol mismatch slows both iPhone and Android

Key Features

PD 65WUp to 65W single port for laptops; smart allocation
Full ProtocolsPD3.0/PPS, QC4+, SCP, AFC all covered
Thermal ProtectionNTC plus derating; stable at 85°C ambient
High EfficiencySynchronous rectification ≥ 92%, low heat
Multi-port2C1A / 2C2A layouts with per-port current limits

Solution Specifications

Typical Car Charger Specs
InputDC 12–24V (gas/diesel)
OutputPD 65W + QC 18W, allocated
ProtocolsPD3.0/PPS, QC4+, SCP, AFC, Apple 2.4A
Efficiency≥ 92% synchronous
ProtectionOVP/OCP/OTP/SCP/UVP
Temperature−20~85°C
FormCigarette-lighter / flush-mount
ComplianceCE / FCC / RoHS / E-Mark

Solution Demo Board

Car Fast Charger Solution Demo PCB

Every solution ships with a runnable demo board at prototype stage: full firmware flashed, debug and test points exposed, so you validate functionality before committing to production — a real, measurable board, not a slide deck.

  • Full firmware flashed — power on and run
  • UART/SWD debug ports and key test points exposed
  • Directly compatible with line fixtures; MP test plan included
  • 3–5 boards per delivery, ready for your own re-spins
View solution brief

Customization Options

Power30W/45W/65W/100W
Ports2C1A / 2C2A / single C
FormLighter plug / flush-mount / with voltmeter

Who It’s For / Deliverables

Who It’s For
  • Car accessory brands & cross-border sellers
  • Automotive electronics ODM factories
  • OEM and aftermarket accessory programs
Deliverables
  • Controller (schematic/PCB/firmware)
  • Protocol certification and test reports
  • Thermal strategy and heatsink design
  • Samples + efficiency/protocol testing

FAQ

Is 65W okay on a 12V system?
Yes — 65W draws about 6A; lighter sockets are usually fused at 10–15A. Above 100W use flush-mount direct wiring.
Will 70°C cabin heat break it?
Designed for 85°C ambient with automotive-grade parts and NTC derating — full load at 70°C, derated to 45W at 85°C.
Does multi-port use slow down?
Power is allocated by priority (e.g., C1 takes 45W, others share 20W) — industry standard; never claim every port at 65W.

Ready to Start?

Send your product requirement — our engineering team responds within 1 business day with a free assessment and quotation.

WeChat
kb19232866955
Phone
+86 192-3286-6955
Email
[email protected]
Working Hours
Mon–Sat 9:00–19:00 (GMT+8)

Your information stays strictly confidential. Typical reply within 1 business day.

Thank you! We’ve received your inquiry and will respond within 1 business day.