Hotline+86 192-3286-6955 [email protected] Mon–Sat 9:00–19:00 (GMT+8)
Power & Mobility

E-bike Controller Solution — Hub Motor FOC PCBA

SOLUTION DEFINITIONAn E-bike controller solution integrates BLDC hub motor FOC drive, pedal-assist sensing (torque or cadence), display communication and battery BMS linkage for e-bikes, scooters and wheelchairs. Assist smoothness and reliability are the keys.
E-bike Controller Solution - MJX

Pain Points We Solve

  • Assist feels jerky — lurching on the first pedal
  • Controllers overheat and shut down on long climbs
  • Display and battery protocols don’t match
  • EU exports require EN 15194 certification

Key Features

FOC Hub DriveSine-wave FOC: quiet and efficient
Pedal AssistTorque/cadence sensing with 5-level smooth output
Display CommsUART/CAN for speed, battery and level display
BMS LinkageCommunicates with battery BMS, derates at low charge
Thermal ProtectionMOS temperature sensing derates on climbs without cutting out

Solution Specifications

Typical E-bike Controller Specs
MCU32-bit motor MCU
MotorBLDC hub 250–750W (36/48V)
Drive6/9/12 MOS, sine-wave FOC
AssistTorque/cadence, 5 levels
CommsUART/CAN (display, BMS)
ProtectionOver-current, over-temp, UVP, stall
ComplianceEN 15194 (EU) / UL 2849 (US) support

Solution Demo Board

E-bike Controller Solution Demo PCB

Every solution ships with a runnable demo board at prototype stage: full firmware flashed, debug and test points exposed, so you validate functionality before committing to production — a real, measurable board, not a slide deck.

  • Full firmware flashed — power on and run
  • UART/SWD debug ports and key test points exposed
  • Directly compatible with line fixtures; MP test plan included
  • 3–5 boards per delivery, ready for your own re-spins
View solution brief

Customization Options

VehicleE-bike / scooter / wheelchair / cargo trike
SensingTorque / cadence / throttle
CommsUART / CAN / BLE app

Who It’s For / Deliverables

Who It’s For
  • E-bike brands and ODM factories
  • Scooter and balance vehicle brands
  • Cross-border sellers: EU/US E-bike growth
Deliverables
  • Controller (schematic/PCB/firmware)
  • FOC and assist curve calibration
  • Display/BMS protocol docs
  • Samples + road-test support

FAQ

How hard is EN 15194?
EMC, water resistance, 25km/h speed limiting and battery safety are the core; we design to standard and support submissions, typically 6–10 weeks.
Torque vs cadence sensing?
Torque senses pedal force for the most natural assist (premium standard); cadence senses motion with fixed assist — cheaper but lurchy.
Can it connect to an app?
Yes — a BLE module enables ride data, level settings and OTA, now standard on modern e-bikes.

Ready to Start?

Send your product requirement — our engineering team responds within 1 business day with a free assessment and quotation.

WeChat
kb19232866955
Phone
+86 192-3286-6955
Email
[email protected]
Working Hours
Mon–Sat 9:00–19:00 (GMT+8)

Your information stays strictly confidential. Typical reply within 1 business day.

Thank you! We’ve received your inquiry and will respond within 1 business day.