Personal Care
Massage Pillow Solution — 3D Kneading Neck & Back Cushion PCBA
SOLUTION DEFINITIONA massage pillow solution integrates a 3D kneading mechanism (forward/reverse, intensity levels), constant heat and car/home dual power for neck pillows, back cushions and leg rests. Value and versatility are the selling points.

Pain Points We Solve
- Thin mechanisms knead like scratching
- Home-only power limits car scenarios
- Heat pads fail early, raising warranty costs
- Commoditized — only price remains
Key Features
3D KneadingForward/reverse with kneading heads, 3 intensity levels
Constant Heat45°C with independent switch
Dual PowerHome adapter plus 12V car lead
Auto Shutoff15-minute timer prevents overuse
Quiet MechanismGeared motors with damping, < 50dB
Solution Specifications
| MCU | 8-bit MCU |
|---|---|
| Mechanism | Dual DC geared motors, forward/reverse |
| Intensity | 3 levels (current control) |
| Heat | 45°C independent switch |
| Power | 12V adapter / car 12V |
| Timer | 15-minute auto stop |
| Noise | < 50dB |
| Compliance | CE / FCC / RoHS |
Solution Demo Board

Every solution ships with a runnable demo board at prototype stage: full firmware flashed, debug and test points exposed, so you validate functionality before committing to production — a real, measurable board, not a slide deck.
- Full firmware flashed — power on and run
- UART/SWD debug ports and key test points exposed
- Directly compatible with line fixtures; MP test plan included
- 3–5 boards per delivery, ready for your own re-spins
Customization Options
FormNeck pillow / back / leg / multi-use
MechanismSingle or dual 3D kneading
ExtrasHeat / vibration / car lead
Who It’s For / Deliverables
Who It’s For
- Personal care brands & cross-border sellers
- Car accessory channels (car massage cushions)
- Gift and bulk-purchase channels
Deliverables
- Controller (main + mechanism drive)
- Kneading curves and intensity calibration
- Samples + noise/temperature testing
- BOM cost table
FAQ
How is this different from the mini-hand kneader?
Pillows use rotating kneading heads for large areas (neck/back); mini-hand units use dual-motor differential for concentrated finger pressure. We build both.
Can it be used in a car?
A 12V car lead is standard; observe the 15-minute timer and avoid use with the engine off to protect the battery.
How long do heat pads last?
2–3 years typical; we use flex-tested films (100k bend cycles) to reduce warranty claims.
Ready to Start?
Send your product requirement — our engineering team responds within 1 business day with a free assessment and quotation.
WeChat
kb19232866955
Phonekb19232866955
+86 192-3286-6955 Email
[email protected]
Working Hours
Mon–Sat 9:00–19:00 (GMT+8)
Mon–Sat 9:00–19:00 (GMT+8)
Thank you! We’ve received your inquiry and will respond within 1 business day.



