Home Environment
Space Heater Solution — PTC Heater PCBA for Desktop & Pet
SOLUTION DEFINITIONA space heater solution integrates PTC ceramic heating drive, PID thermostat control, tip-over and overheat protection with fan interlock for desktop, bathroom and pet heaters. Safety compliance (clearances, flammability, tip-over) is the core barrier.

Pain Points We Solve
- Heaters are safety-sensitive — incomplete protection fails certification
- Thermostats overshoot: hot then cold
- Noisy with plastic smell from heat shock
- Winter peak supply chain fails to keep up
Key Features
PTC ThermostatNTC + PID power modulation, ±2°C stability
Tip-over CutoffMechanical switch + accelerometer dual safety
Dual Overheat GuardThermostat + thermal fuse + firmware limit
Fan InterlockHeater and fan logic interlocked: fan stops last
Quiet & Low OdorSoft start and gradual power ramp reduce heat shock odor
Solution Specifications
| MCU | 8-bit MCU + triac/relay |
|---|---|
| Heating | PTC 300–2000W |
| Thermostat | NTC + PID, ±2°C |
| Protection | Tip-over, thermostat, fuse, firmware limit |
| Fan | DC/AC interlocked with heater |
| Timer | 1–12 hours |
| Safety std | GB 4706 / IEC 60335 / UL 1278 design |
| Compliance | CCC / CE / UL / ETL / RoHS |
Solution Demo Board

Every solution ships with a runnable demo board at prototype stage: full firmware flashed, debug and test points exposed, so you validate functionality before committing to production — a real, measurable board, not a slide deck.
- Full firmware flashed — power on and run
- UART/SWD debug ports and key test points exposed
- Directly compatible with line fixtures; MP test plan included
- 3–5 boards per delivery, ready for your own re-spins
Customization Options
FormDesktop / bathroom wall / pet bed / foot warmer
Power300W/800W/1500W/2000W
FeaturesThermostat / oscillation / timer / remote / humidify
Who It’s For / Deliverables
Who It’s For
- Small appliance brands building heater lines
- Pet brands: pet heaters
- Cross-border sellers: EU/US winter category
Deliverables
- Controller (schematic/PCB/firmware)
- Safety design review checklist
- Samples + temperature-rise/tip-over test reports
- BOM and certification submission support
FAQ
Can it pass UL/ETL?
Designs follow UL 1278 (dual overheat, tip-over, flame-retardant materials, clearances) with successful submissions and remediation support.
Is the thermostat really accurate?
NTC sampling with PID and ambient compensation holds ±2°C — an order of magnitude better than bimetal thermostats.
Any special requirements for pet heaters?
Chew-resistant cables, low surface temperature (< 45°C) and no exposed elements are key; a low-temperature PTC with isolation is available.
Ready to Start?
Send your product requirement — our engineering team responds within 1 business day with a free assessment and quotation.
WeChat
kb19232866955
Phonekb19232866955
+86 192-3286-6955 Email
[email protected]
Working Hours
Mon–Sat 9:00–19:00 (GMT+8)
Mon–Sat 9:00–19:00 (GMT+8)
Thank you! We’ve received your inquiry and will respond within 1 business day.



