Outdoor Robots
Window Cleaning Robot Solution — Vacuum Adhesion & Path Planning PCBA
SOLUTION DEFINITIONA window cleaning robot solution integrates vacuum adhesion control, frame/edge detection, S-pattern path planning and power-loss anti-drop safety for glass-cleaning robots in square and round forms. Adhesion reliability and safety redundancy are the core.

Pain Points We Solve
- High-rise glass cleaning is dangerous and costly to hire
- Weak or interrupted adhesion means falls — a safety incident
- Edge detection fails and the robot jams at the frame
- Random paths leave half the window dirty
Key Features
Closed-loop AdhesionReal-time vacuum feedback with compensation on smooth or slightly rough glass
Anti-drop SafetyBackup battery + safety rope; 20-minute hold on power loss
Edge DetectionOptical + current dual detection slows at the frame
Path PlanningS-pattern coverage with resume and return-to-start
Spray ControlMetering pump with wet-wipe and squeegee rollers
Solution Specifications
| MCU | 32-bit MCU + BLDC drive |
|---|---|
| Adhesion | Vacuum pump, 2500–4000Pa |
| Motion | Dual track/wheel BLDC, 5–15cm/s |
| Safety | 20min backup hold + rope + pressure alarm |
| Sensing | Optical edge + stall current + pressure |
| Power | AC adapter + backup battery |
| Noise | < 65dB |
| Compliance | CE / FCC / RoHS / UL (adapter) |
Solution Demo Board

Every solution ships with a runnable demo board at prototype stage: full firmware flashed, debug and test points exposed, so you validate functionality before committing to production — a real, measurable board, not a slide deck.
- Full firmware flashed — power on and run
- UART/SWD debug ports and key test points exposed
- Directly compatible with line fixtures; MP test plan included
- 3–5 boards per delivery, ready for your own re-spins
Customization Options
ModelSquare (corners) / round (large panes)
CleaningSpray wet / dry / dual roller
SmartRemote / app / voice (optional)
Who It’s For / Deliverables
Who It’s For
- Cleaning appliance brands adding window cleaners
- Robot vacuum makers adding a second category
- Cross-border sellers targeting high-rise apartments
Deliverables
- Complete controller set (main + drive + pump)
- Adhesion safety logic with FMEA
- Path-planning algorithms
- Prototype co-debug + high-altitude safety test plan
FAQ
Will it really not fall on power loss?
A backup battery takes over the vacuum pump instantly — 20+ minutes of hold with a pressure alarm, plus a mechanical safety rope. Three layers.
Does it work on frosted or filmed glass?
Frosted glass loses about 30% adhesion — a compensation mode handles it. Filmed glass works normally; avoid sharp grit.
How long is development?
On the mature platform: 10-day assessment, 45-day first build, 5–7 months to mass production including tooling and certification.
Ready to Start?
Send your product requirement — our engineering team responds within 1 business day with a free assessment and quotation.
WeChat
kb19232866955
Phonekb19232866955
+86 192-3286-6955 Email
[email protected]
Working Hours
Mon–Sat 9:00–19:00 (GMT+8)
Mon–Sat 9:00–19:00 (GMT+8)
Thank you! We’ve received your inquiry and will respond within 1 business day.



